How To Address Tooth Skipping Or Excessive Wear In Circular Saw Blade

1. Incorrect installation of the circular saw blade. When installing the circular saw blade, it must be properly mounted and inspected multiple times. Improper installation may not only cause the metal circular saw blade to fracture but also reduce the service life of the circular saw machine.

2. Incorrect ammeter settings. Improper ammeter settings may cause damage to the circular saw blade and the machine.

3. Inadequate cleaning of Industrial circular saw. Particularly, internal metal shavings, regardless of their size, if not promptly removed, will increase the damage rate of circular saw blades and accelerate their wear.

4. Metal circular saw blades must be handled with care to avoid accidental dropping onto the ground, which may cause uneven surfaces and increase friction due to reduced smoothness.

5. The cutting speed is excessively high. Cutting speed is related to the material being cut, and it should be adjusted promptly according to requirements for different materials. In pursuit of rapid cutting speed, many enterprises blindly adjust the cutting speed, leading to damage of the metal circular saw blade, which is also the root cause of blade damage.

6. The cutting material is excessively dirty. This scenario is relatively uncommon. Some enterprises neglect to clean the cutting material before feeding it directly into the machine, which is a misconception. The material often contains significant amounts of dust, metal shavings, and even soil, all of which can cause substantial friction during the circular saw blade's operation. Excessive friction inevitably leads to rapid wear of the circular saw blade.

7. Excessive single-operation time of Industrial circular saws. This is typically due to production acceleration, where enterprises may operate for over 12 hours daily, or even 24 hours continuously. Under such conditions, the cutting load on circular saw blade increases, and the blades cannot provide adequate cushioning, inevitably leading to accelerated wear.

If you have any interest, welcome to contact us via email letiptop@tiptopmfg.com for a formal quote and talk to LETIPTOP expert to get the support. For more information, please click Circular Saw Blade to view.