CNC band sawing machine wholesale: 

  1. The gap between the two guide arms is too wide. Adjust the guide arm spacing, typically 6-10 cm wider than the material. 



2.The small bearing inside the saw guide angle may be damaged. Replacing the small bearing will fix the issue.


3.The band saw blade might be loose. Tighten the blade.


4.The cutting speed of the band sawing machine is too fast, adjust the speed control valve to slow down the feed speed.


5.Saw blade clamped by guide angle of saw guide arm is not perpendicular to the worktable of saw machine. Solution: Secure the saw blade and adjust the bolt of guide angle of saw to make the saw blade perpendicular to the worktable.


6.Saw blade may be worn out: 


Solution: If the saw blade is repairable, it can be repaired; otherwise, replace the blade.


If you have any interest, welcome to contact us via email letiptop@tiptopmfg.com for a formal quote and talk to LETIPTOP expert to get the support. For more information, please click CNC Band Sawing to view.


CNC_Band_Sawing_2.png