The manufacturer of band saw machines explains the causes of saw blade fracture.

A band saw machine is a sawing machine used for material cutting, equipped with a saw blade. During processing, situations such as saw blade fracture or the emission of sharp noises from the machine may occur. In such cases, it is essential to identify the underlying causes. Let us discuss this with insights from a Zhejiang-based band saw machine manufacturer.

Causes of saw blade tip fracture in band saw machine manufacturers: 

1.The steel brush stops working, causing the tooth slots to become filled with chips, leading to saw blade tip fracture; 

2.Excessive feed rate results in saw blade tip fracture;

3.Improper tooth selection (too small or too large teeth) causes saw blade tip fracture;

4.Workpiece movement during sawing process leads to saw blade tip fracture.

Causes of sharp noises during sawing on a band saw machine: 

1.Excessive lead speed or feed rate; reduce speed or feed rate accordingly. 

2.Improper coolant selection or incorrect formulation; replace the coolant. 

3.Over-tightened guide blocks; adjust the guide block clearance. 

4. Hard spots in the material; rotate the workpiece at a certain angle before resuming cutting.

If you have any interest, welcome to contact us via email letiptop@tiptopmfg.com for a formal quote and talk to LETIPTOP expert to get the support. For more information, please click band saw machine to view.